Rubber Tile Making Mchinery
1.High speed open/close mould 2. High working pressure 3. Commodious space and easy operation 4. Saving energy, reliable action
1.Conching: Put the rubber granulates and stain into the stirring barrel to stir, and then put into the adhesive to stir, This process requires for 4-6 minutes ( because the adhesive is easy to cure, so stir it when use ).
2.Weighing raw materials: Weight the rubber granulates stirred, according to the granulates' thickness requirement Of the tiles.
3.Paving and pressing: Paving the rubber granulates weighted on the mold, then floated it by trowel. Firstly paving the Surface rubber granulates which is fine and color, then the thickness and black.
4.Vulcanization molding: Covering anti adhesion cloth, pushing the mold into vulcanizer to vulcanize, the time of Vulcanization accord to the thickness of the rubber tiles, in general, 3-8inutes finished. After that, Mold separate automatic, then remove floor tile on the shelves to dry.
5.Inspecting: Inspect the surface of the floor tiles formity, no aberration, no flaw, line with the product quality.
Make rubber tile, rubber brick via heating and pression.
Push and pull design save time and enlarge the capacity.Kinds of molds.Specifications:
|Model||D500 × 500-4||D600 × 600-4|
|Capacity (square / 10 minutes)||1||1.5|
|Nominal clamping force (tons)||50||100|
|Specifications of heating board (mm)||500 × 500||650 × 650|
|The interlayer spacing (mm)||150||180|
|Power (kw||3 +20||5.5 +25|
|Dimensions (m)||1.7 × 1.7 × 2||1.9 × 1.9 × 2.1|